Kawasaki Mule Pro Fxt Full Enclosure 2014-2024

IN STOCK AND READY TO SHIP. Normally ships in 1-3 Business days (May be a day or 2 added if ordered with snaps). 

If you need Expedited Shipping Please Call for Pricing. 

WE GIVE NO GUARANTEE ON SELF ADHESIVE SNAPS or Velcro

 PLEASE REMEMBER TO MAKE YOUR CHOICE OF HOW YOU WOULD LIKE YOUR ENCLOSURE TO ATTACH TO YOUR DOORS IN THE DROP-DOWN MENU.  

 Please note that velcro and self adhesive snaps can cause damage to decals if applied over decals.

We sew Velcro along most, if not all of enclosure, this is so you can choose where it works best for you, does not mean it needs to be covered completely with Velcro on the machine. It is best to use small pieces instead of long strips for better adhesion,"

 Enclosure is guaranteed 1 year for quality and workmanship, it will be repaired or replaced at our discretion, as long as the enclosure has not been abused.

 WE DO NOT RECOMMEND TRAILERING WITH THE ENCLOSURE INSTALLED. TRAILER ENCLOSURE WILL VOID WARRANTY.

 Please note that we have found a few roof models that are differing from the "Normal" roof model. Normally the lip of the rear of the roof where the rear window mounts just goes straight up, we have been finding a few random lips that have a lip that goes up, then out about 1/4". If you have this type of roof there are 2 choices. 1.) let us know and instead of the J-Clip, we can add velcro and you can attach my self adhesive velcro to the underside of your roof, or 2.) (most have chose this way) clip off the "out" portion of the roof (1/4") so the J-Clip can attach.

 ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY. ACTUAL PRODUCT MAY VARY DUE TO PRODUCT ENHANCEMENT.

 Enclosure for your Kawasaki Mule Pro Fxt, uses your existing hard roof, and windshield.

 This enclosure is made of heavy duty ballistic material, and installs easily. Sides attach with wraps around your roll cage and across the top of your factory door with your choice of self adhesive snaps (no drilling required), or pop rivet snaps (drilling required). Each window unzips from bottom allowing the door to fully open with unsnapping any snaps. The windows also unzip from top allowing window to open for air or just reaching out of utv for doing things like retrieving mail, or opening gates etc. The entire side can be removed in seconds to allow for removal in warmer weather.

The back has a large window to provide unobstructed view. It attaches to Kawasaki Oem roof with J-hook along top, and has wraps on side that wrap around the roll cage.

 After the initial installation of setting your snaps etc. Which takes less than 1 hour. The enclosure can be removed in just a minute, and reinstalled in less than a minute. 

It comes complete with everything needed for installation and free storage bag